Detail JangkarBatang jangkar biasanya dirancang dengan panjang penuh berulir, yang memberikan kekuatan yang sama. Dibandingkan dengan jangkar biasa dengan ukuran yang sama, jangkar dengan ulir penuh memiliki daya dukung beban 40 persen lebih tinggi. Ini berarti jangkar lebih efektif dalam meningkatkan stabilitas dan keandalan penyangga.Desain batang jangkar memungkinkan untuk merealisasikan fungsi jangkar ujung, jangkar ekstensi, dan jangkar penuh, yang memperbesar cakupan penggunaan batang jangkar.
Liên hệ ngay
Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Liên hệ ngay
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Liên hệ ngay
Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.
Liên hệ ngay
Product Description:The raw material of equal strength rebar anchor is made of steel with elongation of not less than 15%, yield strength of not less than 335MPa, breaking strength of not less than 490MPa, made of 20MnSi by hot lashing, and the compressive strength of 20 tons to 50 tons, the straightness tolerance of φ18 to φ22 rods is less than 2mm/m, and the straightness tolerance of φ16 rods is less than 4mm/m. The carrying capacity of the tail thread of rods should be not less than 75% of the breaking force of the parent material of the rods.
Liên hệ ngay
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Liên hệ ngay
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Liên hệ ngay
Detailed description of anchor pallet 1.Butterfly anchor pallet material:carbon steel Q235A3. 2.Anchor pallet making method:Shearing,punching,punching to make anchor pallet.3.Main specification of anchor tray:120*120*6 120*120*8 120*120*10 150*150*10 150*150*8 140*140*10 140*140*8 4. Anchor pallet implementation standards: coal mine anchor pallet, iron ore anchor pallet, national standard anchor pallet, non-standard anchor pallet.5.Thickness of anchor pallet: 5.5 to 6mm, 7.5 to 8mm, 9.5 to 10mm, 11.5 to 12. 6.
Liên hệ ngay
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Anchor pallet main specifications120*120*6 120*120*8 120*120*10140*140*8140*140*10150*150*8150*150*10Product classification:Mining pallet is
Liên hệ ngay
Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.
Liên hệ ngay
Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235,16Mn,20Mnsi and other raw materials to choose fromProcessingSpecificationDiameter(±0.5)33mm39mm40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235,16Mn,20 MnsiProcessingAfter the material is determined, it is processed according to the thickness of the Friction Anchor wall and the diameter of the pipe.Quality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the products that pass the i
Liên hệ ngay
Description:Split Set Bolts is an efficient and reliable Friction Rock Anchor (Friction Rock Anchor), which is widely used in mining and tunnel support projects. Manufactured from high-strength steel, these bolts provide excellent support through a unique wedge design that expands quickly and tightly against the rock wall during installation, creating a strong friction force.Split Set Bolts are quick and easy to install without the need for resins or other adhesives, which greatly improves construction efficiency.
Liên hệ ngay
1 × 7 Strand PC Steel WireThe term "1 × 7 strand PC wire" refers to a prestressed concrete wire structure with one main wire and seven strand wires. In this structure, the main wire is responsible for carrying the main tensile force, while the strands surround the main wire to provide support and reinforcement.
Liên hệ ngay
The role of the anchor netAnchor mesh support is a kind of support method that is adopted more in deep foundation pit support engineering at present. It is the abbreviation of joint support of sprayed concrete, anchor rods and reinforcing mesh. As an advanced support and reinforcement technology, it has been widely and successfully applied at home and abroad in the geotechnical high slope and large-span underground projects, especially under the adverse geological conditions.
Liên hệ ngay
Description:Rebar Mesh is a high performance reinforcing mesh product widely used in construction and infrastructure projects and is known for its superior strength and durability. It is made from high-strength steel bars through a precision welding process to form a uniform mesh structure that ensures its optimum performance in concrete reinforcement. As a type of Welded Wire Mesh, Rebar Mesh has excellent tensile and compressive resistance, which effectively enhances the overall stability of concrete structures and prevents cracking and deformation.
Liên hệ ngay
Product Description:Our Welded Wire Mesh product is an indispensable material in the building and construction sector, known for its exceptional quality and reliability. Precision machined to ensure a strong connection at every intersection, providing excellent structural support and durability, Welded Wire Mesh combines well with other products in the Rebar & Mesh range to provide a comprehensive reinforcement solution for concrete structures.
Liên hệ ngay
Descriptive：Deformed Round bars, also known as Deformed Reinforcing Steel Bars, offer significant advantages over traditional Barexposed Rebar in construction applications. These bars are designed with enhanced deformations along their surface, which improve the bonding strength with concrete and enhance structural stability. The unique design of Deformed Round bars provides superior load-bearing capacity and resistance to slippage compared to Barexposed Rebar.
Liên hệ ngay
Product Details:Nowadays the widely used anchor disk mainly includes square round hole anchor disk and round round hole anchor disk. The function of the anchor disk is to change the mechanical state of the surrounding rock through the anchors, which makes a whole and stable rock band around the roadway. The anchors work together with the surrounding rock to maintain the stability of the roadway.Anchor plates are considered an active support method in mine support and can be considered a major change in the field of mine support.
Liên hệ ngay
Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Liên hệ ngay
Product description: Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.Specifications and parameters：Pallet Size（mm）carrying capacity(kn)Pallet Size（mm）carrying capacity(kn)note120x120x5≧100200x200x10≧360Partial specifications120x120x6≧115200x200×12≧420120x120x8≧130250x250×8≧320150x150×5≧135250x250x10≧400150x150x6≧170250×250x12≧440150x150x8≧230300x300x10≧420150x150x10≧290300x300x12≧480120x120x10≧260300x300x14≧520Usage:Anchor disk and ancho
Liên hệ ngay
Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Liên hệ ngay
Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Liên hệ ngay
Unleashing Exceptional Support and Strength - Equal Strength Threaded Anchor RodAn Unparalleled Support Tool in Underground EngineeringIntroduction:Underground engineering has always been a realm of human exploration, and an green and reliable assist machine is critical for the safety of underground tunnels and mines.
Liên hệ ngay
Main characteristics of Lewmar Anchor Rode; With anti-aging, anti-temperature sudden change, anti-corrosion, cold and heat resistance, high bearing capacity, high pressure, good tensile performance; It is not easy to deform after loading, moisture-proof, vibration retarding, noise absorption and good insulation. Easy to install, hammering can be done, and no special installation tools are required. Robust Design and MaterialLewmar Anchor Rode are precision-engineered from wonderful substances, imparting top notch energy and sturdiness.
Liên hệ ngay
