Perforated Metal Panels-manufacture,factory,supplier from China

Product details:Anchor pan is a kind of equipment used for roadway support, which changes the mechanical state of the surrounding rock through the joint action of anchor rods and surrounding rock to maintain the stability of the roadway. The anchor plate makes the roadway form a whole and stable rock belt around the roadway, thus preventing the surrounding rock from loosening and deformation, and protecting the roadway from the influence of geological forces.

Anchor Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor. The role of the tray is to transfer the thrust force generated by the nut locking torque to the top gang to generate the initial anchor force, and at the same time transfer the pressure of the roadway top gang to the anchor rod to generate the working resistance, which together reinforce the surrounding rock and stop the displacement of the roadway top gang.

Anchor Tray Description:1. Strength and stiffness: The pallet needs to have sufficient strength and stiffness to withstand the thrust generated by the locking moment of the anchor and the pressure of the top gang. This ensures that the pallet can effectively transmit forces and avoid breakage or deformation.2. Material selection: the material of the pallet should have enough tensile strength and wear resistance to cope with the tensile force and friction force in the process of anchor support. Common pallet materials include steel, aluminum alloy, etc.

Product Details:Mining W-type sheathing is a very important material for mine support and tunnel support.It is designed to effectively improve the overall effect of the anchors and show good stability in incomplete roof rock formations.This kind of sheathing is made of Q235, Q235, Q235, Q235, Q235, Q235, Q235, Q235, Q235 and Q235.

Anchor Tray DescriptionAn anchor tray is a fixing device used in coal mines that is made from a high-strength steel tube with longitudinal slits. It is installed in drill holes slightly smaller than the diameter of the pipe, which immediately exerts radial pressure on the hole wall and stops the surrounding rock from sliding down. At the same time, the pallets of the anchor tray provide additional load-bearing capacity. In this way, the surrounding rock is under three-way stress.

Product Description1. Combine disk bracket with various anchors: M steel belt can be combined with different types of anchors to form disk bracket, which provides stronger support and fixing effect by linking the scattered anchors to form a whole load-bearing structure.2. Widely used in various engineering fields: M steel belt is widely used in the field of coal mine underground roadway, working face cutting eye, roadway support, etc. It is especially suitable for dealing with unstable perimeter rock, and effectively improves the support effect.3.

Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection. As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor.

Product Details:Slit Tube Metal Anchor is an anchor product manufactured through the use of sheet metal rolled and pressed into a tubular rod with longitudinal slits. This type of anchor prevents the surrounding rock from sliding by drilling holes into the rock that are slightly smaller than the diameter of the anchor, realizing that radial pressure is exerted around the holes and generating friction.

Anchor Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor. The role of the tray is to transfer the thrust force generated by the nut locking torque to the top gang to generate the initial anchor force, and at the same time transfer the pressure of the roadway top gang to the anchor rod to generate the working resistance, which together reinforce the surrounding rock and stop the displacement of the roadway top gang.

Product Details:Anchor disk is an important part of mine support, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. They are fixed inside the surrounding rock by anchors to change the mechanical state of the surrounding rock and form a stable rock belt, which maintains the stability of the roadway through the joint action of anchors and surrounding rock.In mine support, anchor pan is an active defensive support method, representing a major change in the field of mine support.

Product Details:Concrete Wire Mesh Panels are essential building materials made from sturdy Wire Mesh and Concrete Welded Wire. These panels consist of a series of wires interconnected by welding, creating a reliable and durable structure for various construction applications. The integration of Concrete Steel Wire Mesh in the panels enhances their strength and resistance to cracking and deformation, making them ideal for reinforcing concrete structures and preventing structural failure.

Product Description:M steel belt is a new type of mine support material, also called top plate steel belt, M steel belt is made of strip steel with thickness of 2-5MM width of 140-220MM, cold bending into M type, and then processed in the center of the steel belt with anchor hole.

Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.

About UsThe company's main products are mining underground roadway support materials "anchor", the company's products anchor, anchor net, mining nuts, anchor plate and so on instead of the traditional support forms and materials of the past coal mine roadway.

Product Details:W steel belt is a new type of material used for mine support and tunnel support. It can be used in combination with various anchors to form a combined anchor support. By means of W steel belt, several scattered anchors can be connected together to form a whole bearing structure, thus significantly improving the overall effect of the anchors. When dealing with unstable surrounding rock, W steel belt can play a good supporting effect in the incomplete roof rock layer.

Description:Our Welded Concrete Mesh is a premium construction material designed to provide exceptional reinforcement for a wide range of concrete structures. Crafted from high-quality steel wires, this product offers unparalleled strength and durability, ensuring optimal performance in demanding applications. The welded wire mesh panels are precisely fabricated to provide consistent spacing and alignment, facilitating seamless installation and reducing labor costs.

Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor.

Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.

Resin anchor product introductionResin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like bonding material, with special polyester film will be divided into two-component packaging with the curing agent medicine volume. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance.

Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.

335 Resin Anchor DescriptionMSGLW series of longitudinal ribless threaded steel resin anchor metal rod products are widely used in underground rock, semi-coal rock and coal tunnel anchor support, especially suitable for underground tunnel and refuge support under complex conditions.

Split Bolt Set Description:1. Split Bolt (Bolt): mainly responsible for connecting structural components, usually made of high-strength metal materials with certain tensile and torsional strength.2. Nut (Nut): used to fix the position of the bolt, usually made of metal materials, need to be used in conjunction with the bolt when connecting.3. Washer: Used to increase the connection area, dispersing the connection pressure, preventing damage to the structural parts, usually made of metal or plastic materials.4.

Slit Tube Anchor OverviewSlit pipe metal anchor is a diploma of metal plate rolled and pressed into a tube with longitudinal seams,it is a new sort of self-anchoring anchor that actively reinforces the surrounding rock of laminar development. It is a new form of self-anchoring anchor that actively reinforces the rock with developed laminations like an increase nail firmly nailed to the surrounding invulnerable rock layer. The compression stress per meter of the anchor into the borehole is about 25kN, and the anchoring strain generated is roughly equal to the compression force.

Mining Construction Mesh Product Description.Mining construction mesh is a reinforcing steel mesh formed by having longitudinal and transverse steel bars of the same or different diameters arranged vertically at a certain spacing respectively, with all the intersections welded together by electric resistance spot welding. It is a mesh reinforcing steel product welded and molded directly in the factory to replace the hand-tensioned steel bars, which is a new type of new, high-efficiency, energy-saving, and reinforced concrete structure for construction.