Metal Pipe-manufacture,factory,supplier from China

Product Details:Slit Tube Metal Anchor is an anchor product manufactured through the use of sheet metal rolled and pressed into a tubular rod with longitudinal slits. This type of anchor prevents the surrounding rock from sliding by drilling holes into the rock that are slightly smaller than the diameter of the anchor, realizing that radial pressure is exerted around the holes and generating friction.

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.

Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235, 16Mn, 20 Mnsi and other raw materials to choose fromSpecificationDiameter(±0.5)33mm39mm 40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235，16Mn，20 MnsiWeldingThe retaining ring interface has no cracks, no slag inclusions, and no burning through the pipe wallAssembleRetaining ring and Split Sets Anchor body to assembleQuality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the p

Product DetailsHollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of two ~ 3mm), can be at once alongside the gap to the eighty ~ 100cm vary of radial strain on the gap wall and the friction produced via the layer to stop the surrounding rock sliding down, coupled with the anchor tray tray bearing force.

Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.

Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.

Anchor Tray DescriptionAn anchor tray is a fixing device used in coal mines that is made from a high-strength steel tube with longitudinal slits. It is installed in drill holes slightly smaller than the diameter of the pipe, which immediately exerts radial pressure on the hole wall and stops the surrounding rock from sliding down. At the same time, the pallets of the anchor tray provide additional load-bearing capacity. In this way, the surrounding rock is under three-way stress.

Slit Tube Anchor OverviewSlit pipe metal anchor is a diploma of metal plate rolled and pressed into a tube with longitudinal seams,it is a new sort of self-anchoring anchor that actively reinforces the surrounding rock of laminar development. It is a new form of self-anchoring anchor that actively reinforces the rock with developed laminations like an increase nail firmly nailed to the surrounding invulnerable rock layer. The compression stress per meter of the anchor into the borehole is about 25kN, and the anchoring strain generated is roughly equal to the compression force.

Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Product DescriptionMain technical performance: Initial anchoring force: 3~7 tons; Pipe ring pull-off load: 8~10 tons; Anchor pipe pull-off resistance: 12~13 tons; Corrosion resistance is 20~30% higher than that of A3 steel, which is conducive to long-term use.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345  Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.

Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.

Product details:Anchor pan is a kind of equipment used for roadway support, which changes the mechanical state of the surrounding rock through the joint action of anchor rods and surrounding rock to maintain the stability of the roadway. The anchor plate makes the roadway form a whole and stable rock belt around the roadway, thus preventing the surrounding rock from loosening and deformation, and protecting the roadway from the influence of geological forces.

Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.

Resin anchor product introductionResin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like bonding material, with special polyester film will be divided into two-component packaging with the curing agent medicine volume. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance.

Anchor Tray Description:1. Strength and stiffness: The pallet needs to have sufficient strength and stiffness to withstand the thrust generated by the locking moment of the anchor and the pressure of the top gang. This ensures that the pallet can effectively transmit forces and avoid breakage or deformation.2. Material selection: the material of the pallet should have enough tensile strength and wear resistance to cope with the tensile force and friction force in the process of anchor support. Common pallet materials include steel, aluminum alloy, etc.

Split Bolt Set Description:1. Split Bolt (Bolt): mainly responsible for connecting structural components, usually made of high-strength metal materials with certain tensile and torsional strength.2. Nut (Nut): used to fix the position of the bolt, usually made of metal materials, need to be used in conjunction with the bolt when connecting.3. Washer: Used to increase the connection area, dispersing the connection pressure, preventing damage to the structural parts, usually made of metal or plastic materials.4.

Anchor Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor. The role of the tray is to transfer the thrust force generated by the nut locking torque to the top gang to generate the initial anchor force, and at the same time transfer the pressure of the roadway top gang to the anchor rod to generate the working resistance, which together reinforce the surrounding rock and stop the displacement of the roadway top gang.

335 Resin Anchor DescriptionMSGLW series of longitudinal ribless threaded steel resin anchor metal rod products are widely used in underground rock, semi-coal rock and coal tunnel anchor support, especially suitable for underground tunnel and refuge support under complex conditions.

Product Details:Mining W-type sheathing is a very important material for mine support and tunnel support.It is designed to effectively improve the overall effect of the anchors and show good stability in incomplete roof rock formations.This kind of sheathing is made of Q235, Q235, Q235, Q235, Q235, Q235, Q235, Q235, Q235 and Q235.

Product DescriptionHollow anchor rod, also called rock stabilizer, is an advanced material essential for underground support. Pipe slit anchor is a highly specialized support item, which is an advanced material used for underground culvert roof and other engineering support.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345  Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.

Product description: Metal mesh is made of low carbon steel wire spot welded, mesh size, wire diameter thickness can be changed, in the mine, shaft, mine tunnel can play an inevitable supporting role, metal mesh is strong and durable, long life.

Product Description：Our Rock Bolt In Tunnel range is an advanced solution designed for the reinforcement of tunnel structures. These include the Pipe Seam Anchor Rod, which provides strong support at the joints of the tunnel tubes, ensuring a solid and reliable tunnel structure, and the Rock Anchor Split technology, which provides long-lasting support at the rock split face, enhancing the overall safety of the tunnel.